Consumables

  Plastic Mounting Cup It is a top and bottom separable mounting cup made of plastic material. There is almost no deformation due to resin, so it can be used for a long time. There is a side that is somewhat difficult to separate the mold due to adhesion during resin curing. It is easy to attach if the lower part is made of plastic material and an adhesive, etc. should be used...

  Teflon Mounting Cup It is a top and bottom separable molding cup made of a Teflon material. It can be used permanently because there is no worry about deformation due to resin. The separation of the mold by adhesion after resin curing is relatively difficult compared to the Rubber Cup. If necessary, the Mold Release may be used to reduce the inconvenience of separation. ...

  R/T Mounting Cup It is a top and bottom separable mounting cup. The upper part is made of a rubber material, so it is easy to separate after resin curing, and the lower part is made of a Teflon material and is easy to use an adhesive, etc. besides the use of a molding clip when sample holding is performed. R/T Mounting Cup : Up/down detachable 25mm, 32mm. (Upper Rubb...

  R/R Rubber Mounting Cup The R/R Rubber Mounting Cup is a top and bottom separable cup that generally has a long life and can be used semi-permanently in some resins. Since there is no adhesion to Resin, it is easy to separate molding after resin curing. R/R Rubber Mounting Cup : Top and bottom detachable cups 25mm and 32mm.

  Rubber Mounting Cup The Rubber Cup generally has a long lifespan and can be used semi-permanently in some resins. Since there is no adhesion to Resin, it is easy to separate molding after resin curing. Circular Rubber Mounting Cup - Integral 25mm, 32mm, 38mm, 50mm Square Rubber Mounting Cup - Integral 50x50mm, 70x70mm   .

  PL-Ring Mounting Clips PL-Ring is a  mounting clip of spring-type, which is the same form as Sus Clip, but can smoothly fix the sample with less force than Sus Clip. PL-Ring Mounting Clips : 100EA/PK 

Multi Mounting Clips It is a clip made of plastic in the form of 'W' and can hold up to five sample in both directions. It is made of plastic, so it is possible to work smoothly without any foreign substances during grinding and fine polishing. Multi Mounting Clips : 50EA/PK

    Plastic Mounting Clips It is a plastic clip in the form of 'Y' and is used to vertically fix a single sample. Holding of a thin FPCB board less than 0.1 T is also possible, and soft work is possible during grinding and fine polishing. Plastic Mounting Clips : 100EA/PK

  SUS Mounting Clips It is a Cilp widely used for sample holding when curing at room temperature, and vertical holding is easy. It is made of Sus material and is rolled on both sides, and Sample Holding is wide, making it easy to hold various specimens. Sus Mounting Clips : 100EA/PK, 500EA/PK